Wednesday, September 19, 2007

Pvc Pipe Freeze Point



need:
- 6 shells cd (more like more I want to do big)
self-adhesive Velcro, hot glue

-resistant transparent plastic
- two strips

Open 3 cd covers and stick with silicone next to each other, so that they are linked together but can be closed more or less. Do the same with the other three. Once the modules have the two will face each other so as to touch the tops of the two forming the roof of future emissions and put it with the inclination that we want (unless more surface slope but less height) so I according to our taste will function for what we want to serve or want to put plants, silicone seal on the "hinge" bearing housings leaving the desired inclination is no longer moving. Repeat with the other module and once done will stick to the top, so that they are united, and will stick the strips connecting the two walls at the base, preventing it from opening the structure. Measures will mark the bottom and front to the canvas and trying it will cut one piece everything. Will the edges of the front and the base of the structure and also put Velcro around the perimeter of the canvas that we have cut (even better-reinforced adhesive silicone) and we can join the structure, press a little to get a good latch and we have our conservatory. When moving or if you have it fixed on a wooden surface, I recommend leaving it on a rubber size to avoid condensation that may be down and the lift does not break the plastic. To open it you just have to take off the front and velcro to keep the plastic is separated from the structure to save space. If for some reason you need to lower the internal temperature has paid me to place a block of ice for ice boxes, those blue, thou must bear in mind that leaks at the base by the condensation so Put him a saucer underneath. It gives amazing results, I've since summer to 18 ยบ C while the room at 31 ° c. I hope you find it useful.

Below some pictures the result: